Search
  �Create Your Own Solution
 
 
 
CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP
CL-3000, HD-SDI or SD-SDI to QAM inserter
CL-2000, HD Component Video or VGA Video to QAM Inserter
CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast
CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber
CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver
CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km
CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer
CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer
CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer
CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer
CL-10V, 10 Channel Video Fiberoptic Multiplexer
CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport
CL-350, MPEG Transport Stream Converter
CL-350S, MPEG Transport Stream Fiberoptic Converter
CL-110, MPEG-2 Digital Video Decoder
CL-220, MPEG-2 Digital Video Encoder
CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter
CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver
CL-5000VA, Video/Audio Card Module
CL-5000DVB, DVB-ASI/SMTPE 310M Card Module
CL-FOS, Automatic and Manual optical redundant failover switch 1×2, 2×1 or 2×2
CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder
CL-HDMI2IP, HDMI to IP High definition Encoder
CL-HDMI-RF, HDMI true 1080p High definition wireless transmission
CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder
CL-12ASI2I, 12ASI to IP converter
CL-12IP2AS, IP to up to 12 ASI converter
CL-ASI2IP, ASI to IP and IP to ASI converter
CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter
CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy
CL-RF-SW, 2×1 RF switch, with its high resolution to the RF monitor
CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer
CL-MPEG224, MPEG-2 to MPEG-4 Transcoder
CL-MPEG422, MPEG-4 to MPEG-2 Transcoder
CL-4100, HD/SD - SDI to ASI Real time Encoder Converter
CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output.
CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber
CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier
CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder
CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input
CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI
CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler
�Model�� CL-ASI2DS3�
CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional

DVB ASI MPEG Transport Stream over DS3 Line

The CL-ASI2DS3  is a DVB-ASI to DS3/E3 converter, used for transporting DVB-ASI signals over and SDH DS3 line. CL-ASI 2 DS3 is used as ASI over DS3 transmitter, converting DVB-ASI MPEG-2 TS stream into DS3 data stream for transmitting. CL DS3-2-ASI, can be used as DS3 receiver, restoring DS3 data stream into DVB-ASI MPEG-2 Transport Stream. Multiplexed ASI can by transported at bit rates up to 44Mb/s. DS-3 which stands for Digital Signal Level 3, equates to 28 T-1 lines or 44.736 million bits per second (roughly 43-45 Mbps upstream/downstream speeds). DS-3s have enough bandwidth to allow very large Video Audio Multipled ASI TS transferring over busy wide area networks, it is a perfect medium to transport a DVB-ASI MPEG-2 Transport Stream. The CL-ASI 2 DS3 is able to transmit and receive ASI at the same time. It has SNMP with a real time monitoring feature.



Features


. Full hardware solusion;
. Half -duplex or Full-duplex ASI to DS3, DS3 to ASI or both;
. 8MB cache, anti-burst stream;
- PCR jitter equalization
-Transparent transmission without ATM adapting process, directly mapping Ds3 frame
-LED and SNMP alarm
-Input/output TS is MPEG-2 transport stream Up to 44Mbps
-DS3/E3 stream frame structure complies ITU-TG.752,ITU-TG.804;
- DS3/E3 signal physical interface complies ITU-TG.703;
-Transmitting output DS3:44.736Mbit/s;
-Receiving input DS3:44.736Mbit/s
-Management Ethernet RJ45 , keyboard, LCD
-Very reliable ASI TS MPEG-2 / MPEG4 transmission



. Real-time stream monitoring SNMP or Monitoring Software;
. Local and remote control;
. LCD display and control, easy and flexible to operate;
. High reliability design, stable operation.

Model Selection


CL-ASI 2 DS3
ASI over to DS3 coverter - Transmitter (it can be set as a receiver or both)
CL-DS3 2 ASI
DS3 to DVB-ASI coverter - receiver (it can be set as a Transmiter or both)


Specifications


Standards
DS3 (44Mbps) or E3 (34Mbps)
output-Input/output TS is MPEG-2 transport stream Up to 44Mbps
Maximum multiplexed ASI payload capacity (up to 43.4Mbps (DS3) or 33.6Mbps (E3)

-DS3/E3 stream frame structure complies ITU-TG.752,ITU-TG.804;
- DS3/E3 signal physical interface complies ITU-TG.703;
-Transmitting output DS3:44.736Mbit/s;
-Receiving input DS3:44.736Mbit/s
-DVB validity check (PID, PAT, PMT, ES and SES)
Ports
Input formats -DVB-ASI (EN50083-9), or ASI (Pseudo ASI for sub-multiplexing), containing data from 800kbps up to 43.4Mbps
Impedance -75 Ohm
level - 800mV (p - p)
Cable Equalization- 260m of Belden 8281 cable
Dimensions
1U 19" rackmount Size 45mm*480*245mm
Environment
0 ~ 45℃ (Operating); -20 ~ 80℃(Storage)
Power Requirements
110-220VAC±10%,50Hz,60Mhz 23W
Regulatory Compliance
Standard - DVB-ASI (EN50083-9)
Format - 45Mbps - DS3 (B3ZS)| C-bit parity34Mbps - E3 (HDB3)| E3 G.751ASI Submux ASI packets 192/208 bytes from VS9500 (Pseudo ASI for sub-multiplexing)
-Output - 1 x E3 or DS3
-Payload - 43.4Mbps max - DS3| 33.6Mbps max - E3
-UL, CE, FCC, Class A

 
 
Go back to home page Previous page Back to top
Search
Company : News : Solutions : Technology : Support : Clients : Contact Us