Search
  �Create Your Own Solution
 
 
 
CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP
CL-3000, HD-SDI or SD-SDI to QAM inserter
CL-2000, HD Component Video or VGA Video to QAM Inserter
CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast
CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber
CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver
CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km
CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer
CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer
CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer
CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer
CL-10V, 10 Channel Video Fiberoptic Multiplexer
CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport
CL-350, MPEG Transport Stream Converter
CL-350S, MPEG Transport Stream Fiberoptic Converter
CL-110, MPEG-2 Digital Video Decoder
CL-220, MPEG-2 Digital Video Encoder
CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter
CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver
CL-5000VA, Video/Audio Card Module
CL-5000DVB, DVB-ASI/SMTPE 310M Card Module
CL-FOS, Automatic and Manual optical redundant failover switch 1×2, 2×1 or 2×2
CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder
CL-HDMI-RF, HDMI true 1080p High definition wireless transmission
CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder
CL-12ASI2I, 12ASI to IP converter
CL-12IP2AS, IP to up to 12 ASI converter
CL-ASI2IP, ASI to IP and IP to ASI converter
CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter
CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy
CL-RF-SW, 2×1 RF switch, with its high resolution to the RF monitor
CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer
CL-MPEG224, MPEG-2 to MPEG-4 Transcoder
CL-MPEG422, MPEG-4 to MPEG-2 Transcoder
CL-4100, HD/SD - SDI to ASI Real time Encoder Converter
CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output.
CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional
CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber
CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier
CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder
CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input
CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI
CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler
�Model�� CL-HDMI2IP�
CL-HDMI2IP, HDMI to IP High definition Encoder

HD H.264 Encoder and IP Gateway for HDMI, DVI, or VGA Signals

The H-HDMI-IP unit is a High Definition Video / Audio over IP transport system for HDMI, DVI, or VGA signals. With this unit you can stream an HDMI, DVI, or VGA signal to anywhere in the world over the Internet or other IP based Ethernet network. While lower quality units use JPEG encoding our H-HDMI-IP encoder features H264 encoding which uses less than half the bandwidth of MPEG-2. The H-HDMI-IP unit offers broadcast quality encoding with a low time delay, typically around 200 ms. Our system offers an optional USB port on the encoder that lets you save the output stream to an attached USB storage device. The unit features an integrated web server for remote management and monitoring. The H-HDMI-IP system is perfect for anyone who wants to transport or multicast an HDMI, DVI, or VGA source.

For larger order disocunts contact us today: Contact Us!

Buy Now: $1,540.00 USD



Add to Shopping Cart:



Features


 High Quality Broadcast level encoding based on H264/MPEG-4
 Integrated web server for remote management and monitoring
 Hardware encoding with low time delay of typically 200ms
 Enhanced circuitry for true synchronization between audio and video
 Supports HDMI, DVI, VGA or Component HD Video
 Easy to install and simple to use

Model Selection


CL-HDMI2IP
HDMI to IP High definition Encoder
CL-IP2HDMI
IP to HDMI Decoder


Specifications


Aplications
Video Characteristic
-Video bit rate:5M-15M bps
-Mode of Video digital output :Fix rate/change rate
-Resolution: VGA,HDMI ,component
1024×768@60HZ 1024×768@75HZ 1280×720@60HZ 1440*900@60 1280×1024@60 , 1920*1080@50I 1920*1080@59.94HZ 1920*1080@60HZ

-Brightness, contrast ratio, the degree of saturation chromaticity adjustable, level shifting adjusted
-Output video streaming format :TS/VES/AES etc.

-Encoding :
-ISO/IEC-14496-10/H.264 Baseline/Main/High Profile

-Frame rate:
-NTSC: 30 frame/second
-PAL: 25 frame/second
-VGA: 30 frame/second
-HDMI: 30 frame/second,25 frame/second

Audio Characteristic
-Video sampling frequency: 32K,44.1K,48K
-Audio rate
32K,48K,56K,64K,80K,96K,112K,128K,192K,224K,384Kbps
-Audio enoding AAC-LC, G.711 etc.
-Mode of audio Mono, Stereo



Standards
Characteristic of Physical
-Dimension:24×16×6cm
-Power supply:12V DC
-Rate:3.6W
-Working temperature:-15C-50C
-Storage temperature:-40C-75C
Connection Ports
Interface Characteristic
-Input of video: component ,VGA ,HDMI
-Data communication interface:RS485,RS232,Baud rate: 1200~115200bps
-Network interface: 10/100M Ethernet RJ45

 
 
Go back to home page Previous page Back to top
Search
Company : News : Solutions : Technology : Support : Clients : Contact Us