Fiber Optic Transmitters Receivers Transceivers signal converters

1.	CL-100, Fiberoptic 100Mbps Ethernet Transceiver
2.	CL-100T1, Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232
3.	CL-155, Fiberoptic 155 Mbps Multimode to Singlemode Converter
4.	CL-200, Fiberoptic 10/100Mbps Ethernet Transceiver
5.	CL-200MN, Two-port Fiberoptic Managed 10/100 to 100BASE-FX Converter
6.	CL-1250, Fiberoptic Gigabit Ethernet Tranceiver
7.	CL-1250C, Fiberoptic Gigabit Ethernet Tranceiver
	CL-2500, CWDM System Chassis
9.	CL-5000, CWDM System Chassis
10.	CL-RS232, RS-232 to Fiber Converter
11.	CL-T1/E1, IP over TDM Gateway
12.	CL-T1/ET, E1/T1 over IP Gateway for LAN Telecom Application
13.	CL-5000FE, Card Module for System Chassis CL-2005 and CL-5000
14.	CL-5000GE, Card Module for System Chassis CL-2005 and CL-5000

�Model��

CL-2500�

	CL-2500, CWDM System Chassis

CL-2500 System Chassis is a Card Cage combined with a built-in WDM or CWDM optical trunking multiplexer that supports up to 4 CWDM wavelengths or Simplex or Duplex optical signals over one strand of the fiber. The CL-2500 employs separate optical channels for each optical link, which enhances network security by completely isolating each channel.
The CL-2500 houses modules, which access the internal CWDM fiber system. It has easy-to-read diagnostic LED's for LAN and WAN port's optical link status. Moreover it has an SNMP option for remote monitoring. The CL-2500 uses standard SC or SC/APC fiberoptic connectors.

Features

- Two or Four Full Duplex Signals over one Fiber
- Hot Swap modules
- Hot Swap, Load Sharing Power Supplies
- Power Supply: 110V AC, 220V AC or -48V DC
- 20-110km Transmission Range
- 1 or 2 Fiber strand transmission

Example Aplication

Model Selection

CL-2500CC-CWDM-2PS-1S-SCA-0

CWDM Card Cage, 2 PortSimplex, 1310, 1510-1570nm, Single Fiber, SC/APC Connector

CL-2500CC-CWDM-4PD-1S-SCA-0

CWDM Card Cage, 4 PortDuplex, 1310, 1470-1610nm, Single Fiber, SC/APC Connector

CL-2500CC-CWDM-8SD-1S-SCA-0

CWDM Card Cage, 8 PortSimplex, 1470-161 Onm, Single Fiber, SC/APC Connector

Specifications

Available Modules

- Gigabit Ethernet TX to LX
- Gigabit Ethernet SX to LX
- Dual Gigabit Ethernet SX to LX
- 30 Mbps - 2.7 Gigabit Programmable Repeater
- IF Frequency Digitizer
- Video/Audio Multiplexer
- DVB-ASI: 1 Channel, 2 Channel
- DS1,DS3, OC3, E3
- Fast Ethernet

Standards

19" Rackmount Card Cage, 2U High

Dimensions

430mm x 254mm x 89mm

Environment

Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 70°C
Operating humidity: 10% to 90% RH
Storage humidity: 5% to 90% RH

Input Power Requirements

Voltage: 110/240V Auto-sense Internal Power,
Optional Redundant, Load Sharing -48V DCSuppiies

Regulatory Compliance

FCC Part 15 Class A, CE, UL, CUL, TUV

Network Media

RJ-45, (Optional SNMP Monitoring Port)